Effects of calcination and support on supported manganese catalysts for the catalytic oxidation of toluene as a model of VOCs

The conventional impregnation method was used to prepare 15 wt% Mn-supported catalysts, which were applied to the catalytic oxidation of volatile organic compounds (VOCs; toluene, benzene, and o-xylene). The effects of calcination temperatures in the range of 500–900 °C and supports (γ-Al₂O₃, SiO₂, and TiO₂) on the property and performance of 15 wt% Mn-supported catalysts were investigated. Their physicochemical characteristics were analyzed by the BET, XRD, NH₃–TPD, H₂–TPR, and XPS. The calcination temperature greatly affected the crystalline structure and O1s _D (defect oxides)/O1s _L (lattice oxides) area ratio of the 15 wt% Mn/γ-Al₂O₃ (15 Mn/Al) catalyst. The order of the O1s _D/O1s _L area ratios of the 15 Mn/Al catalysts with respect to calcination temperature was 900 > 500 > 700 °C, which was in good agreement with that observed for the catalytic activity. In addition, the activity order of the 15 wt% Mn-supported catalysts with respect to the type of support was γ-Al₂O₃ > SiO₂ > TiO₂. The 15 wt% Mn/Al catalyst, which had a higher O1s _D/O1s _L area ratio, showed better activity than the 15 wt% Mn/SiO₂ (15 Mn/Si) and 15 wt% Mn/TiO₂ (15 Mn/Ti) catalysts. Defect oxides played a significant role in the catalytic oxidation of VOCs. The catalytic activity with respect to the type of VOC decreased in the order of benzene > toluene > o-xylene.     

Polyfluorophore Labels on DNA: Dramatic Sequence Dependence of Quenching

We describe studies carried out in the DNA context to test how a common fluorescence quencher, dabcyl, interacts with oligodeoxynucleoside fluorophores (ODFs)—a system of stacked, electronically interacting fluorophores built on a DNA scaffold. We tested twenty different tetrameric ODF sequences containing varied combinations and orderings of pyrene (Y), benzopyrene (B), perylene (E), dimethylaminostilbene (D), and spacer (S) monomers conjugated to the 3′ end of a DNA oligomer. Hybridization of this probe sequence to a dabcyl‐labeled complementary strand resulted in strong quenching of fluorescence in 85 % of the twenty ODF sequences. The high efficiency of quenching was also established by their large Stern–Volmer constants (K_SV) of between 2.1×10⁴ and 4.3×10⁵ M ^?1, measured with a free dabcyl quencher. Interestingly, quenching of ODFs displayed strong sequence dependence. This was particularly evident in anagrams of ODF sequences; for example, the sequence BYDS had a K_SV that was approximately two orders of magnitude greater than that of BSDY, which has the same dye composition. Other anagrams, for example EDSY and ESYD, also displayed different responses upon quenching by dabcyl. Analysis of spectra showed that apparent excimer and exciplex emission bands were quenched with much greater efficiency compared to monomer emission bands by at least an order of magnitude. This suggests an important role played by delocalized excited states of the π stack of fluorophores in the amplified quenching of fluorescence.     

Problems in determining the elastic strain energy function for rubber

Lightly crosslinked natural rubber can be stretched by 600% or more, and recovers almost completely. It is often regarded as a model highly elastic material and characterized by a strain energy function to describe its stress-strain behavior under various types of deformation. A number of such functions have been proposed; some of them appear in current finite element programs. They are usually validated by comparison with measured stress-strain relations by Treloar [7] [L.R.G. Treloar, Stress-strain data for vulcanized rubber under various types of deformation, Trans. Faraday Soc. 40 (1944) 59-70] and Jones and Treloar [15] [D.F. Jones, L.R.G. Treloar, The properties of rubber in pure homogeneous strain, J. Phys. D Appl. Phys. 8 (1975) 1285-1304]. But Treloar pointed out that the relations at high strains became markedly irreversible, and he did not assign a strain energy function for strains greater than about 300%. Rivlin's universal relation between torsional stiffness and tensile stress [14] [R.S. Rivlin, Large elastic deformations of isotropic materials. Part V1: further results in the theory of torsion, shear and flexure, Philos. Trans. R. Soc. A 243 (1949) 251-288] is applied here to show that a typical elastic solid cannot be described by any strain energy function at strains greater than about 300%. Elastic strain energy functions for higher strains, or for other rubbery materials, are thus of doubtful value unless evidence for reversibility of stress-strain relations is adduced or the applicability of a strain energy function is demonstrated.     

Fast iterative methods for symmetric sinc-Galerkin systems

The symmetric sinc-Galerkin method developed by Lund, when appliedto the second-order self-adjoint boundary value problem, givesrise to a symmetric coefficient matrix has a special structureso that it can be advantageously used in solving the discretesystem. In this paper, we employ the preconditioned conjugategradient method with banded matrices as preconditioners. Weprove that the condition number of the preconditioned matrixis uniformly bounded by a constant independent of the size ofthe matrix. In particular, we show that the solution of an n-by-ndiscrete symmetric sinc-Galerkin system can be obtained in O(nlog n) operations. We also extend our method to the self-adjointelliptic partial differential equation. Numerical results aregiven to illustrate the effectiveness of our fast iterativesolvers.     

Clonazepam release from core-shell type nanoparticles composed of poly(γ-benzyl L-glutamate) as the hydrophobic part and poly(ethylene oxide) as the hydrophilic part

Block copolymers consisting of poly(γ-benzyl L -glutamate) (PBLG) as the hydrophobic part and poly(ethylene oxide) (PEO) as the hydrophilic part were synthesized and characterized. Core shell type nanoparticles of the block copolymers (abbreviated GEG) were prepared by the dialysis method. Under fluorescence spectroscopy measurement, the GEG block copolymers were associated in water to form core shell type nanoparticles as polymeric micelles and the critical micelle concentrations (CMC) values of the block copolymers decreased with increasing PBLG chain length in the block copolymers. Transmission electron microscopy (TEM) observations revealed nanoparticles of spherical shapes. From dynamic light scattering (DLS) study, sizes of nanoparticles of GEG-1 and GEG-2 copolymer were 64.3 ± 28.7 nm and 28.9 ± 7.0 nm. The drug-loading contents of GEG-1 and GEG-2 nanoparticles were 15.2 and 8.3 wt %, respectively. These results indicated that the drug-loading contents were dependent on PBLG chain length in the copolymer. Then, the longer the PBLG chain length, the more the drug-loading contents. Release of clonazepam (CNZ) from the nanoparticles was slower in higher loading contents of CNZ than lower loading contents due to the hydrophobic interaction between PBLG core and CNZ. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 415–423, 1998     

Effects of UV irradiation on physico‐mechanical properties of EPDM/buckminsterfullerene composite

Ethylene propylene diene rubber‐fullerene (EPDM/C60) composite, partially crosslinked by ultraviolet (UV) radiation, was prepared and characterized for crosslink density, mechanical properties and thermal behavior. FT‐IR analysis showed peak disappearance at 1688 cm^?1, corresponding to the unsaturation of EPDM, and the appearance of new peaks relating to the formation of oxidation products of C60, such as epoxide, keto, aldehyde and carboxylic groups. Solubility studies demonstrated the dissolution of pristine EPDM in toluene even after a longer period of UV exposure, whereas EPDM/C60 composite became insoluble and/or swollen after 6 hr of UV exposure, indicating the formation of partial crosslinking between EPDM and C60. Differential scanning calorimetry (DSC) measurements revealed an increase in the glass transition temperature peak of UV‐cured EPDM. Thermogravimetric analysis (TGA) showed that UV exposure reduced the thermal decomposition temperature of EPDM/C60, pristine EPDM and dicumyl peroxide (DCP)‐cured EPDM. The modulus, tensile stress and elongation at break of EPDM/C60 composites were greatly influenced by the duration of UV irradiation. Comparison of UV‐cured EPDM/C60 composite with DCP‐cured EPDM confirmed the superior strength properties of the former system. Copyright © 2004 John Wiley & Sons, Ltd.     

Microfluidic channels fabricated on mesoporous electrospun fiber mats: A facile route to microfluidic chips

We report a facile way of preparing microfluidic channels filled with electrospun functional fibers. Patterned elastic molds were in tight contact with electrospun fiber mats without any leak of the analyte solution. As an example of the simple devices, we demonstrated a microfluidic protein chip selectively purifying histidine‐tagged proteins. Highly mesoporous nitrilotriacetic acid‐functionalized polystyrene (PS‐NTA) fibers were produced by taking advantage of interpenetrating phase separation between PS and PEO during electrospinning. The specific interaction of Ni‐complexed PS‐NTA fibers with histidine enabled us to immobilize only target proteins from highly heterogeneous protein mixtures. The easy process to fabricate functionalized microchannels combined with the high production throughput from electrospinning may greatly contribute to chip‐based chromatographic and bioanalytical devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Selective sensor for silver ions built from polyfluorophores on a DNA backbone

To explore a new modular metal ion sensor design strategy, fluorophores and ligands were incorporated into short DNA-like oligomers. Compound 1 was found to function as a selective sensor for Ag(+) in aqueous buffer, where low micromolar concentrations of Ag(+) induce a red-shifted, turn-on fluorescence signal. Experiments with HeLa cells show that 1 can penetrate cells and yield a signal for intracellular Ag(+). This suggests a broadly applicable approach to developing sensors for a wide variety of cations.